Penn State Behrend
    School of Engineering
    5101 Jordan Road
    Erie, PA  16563-1701

    Office: REDC 213E
    Phone: (814) 898-6480
    Fax: (814) 898-6125
    Email: dhj1@psu.edu

Mr. David H. Johnson, P.E.
Publications

Articles published in refereed journals

Johnson, D. H., and Englund, R. B., “Finite element analysis of a threaded connection supported by experimental and theoretical research,” Journal of Engineering Technology, vol. 14, no. 2, pp. 42-47, 1997.

Johnson, D. H., and Roth, D. E., “Finite element analysis in engineering technology,” Journal of Engineering Technology, vol. 5, no. 4, pp. 8-11, 1995.
 
Johnson, D. H., “Finite element analysis applications in undergraduate engineering,” Computers in Education Journal, vol. 5, no. 4, pp. 40-44, 1995.

Johnson, D. H., “Customizing the UADAPT macro of the ANSYS program,” ANSYS TechNotes, no. 11, pp. 11.1.1-11.1.11, June 1993. [Invited author]

Rajakumar, C., and Johnson, D. H., “Finite element predictions of free convection heat transfer coefficients of simulated electronic circuit boards,” American Society of Mechanical Engineers Journal of Electronic Packaging, vol. 3, no. 2, pp. 129-134, 1989.

Rajakumar, C., Johnson, D. H., and Finkel, J. I., “Buoyancy-induced flow computations in electronic packaging using the ANSYS program,” ANSYS TechNotes, no. 2, pp. 2.4.1-2.4.17, 1988.

Panzer, L. H., and Johnson, D. H., “Casting solidification: Residual stress and permanent distortion,” ANSYS TechNotes, no. 3, pp. 3.3.1-3.3.31, 1998.

Johnson, D. H., “Torsion Analysis with ANSYS Thermal Analogy,” ANSYS TechNotes, no. 1, pp. 1.3.1-1.3.26, 1987.

Articles published in refereed proceedings

Khalilollahi, A., Roth, J. T., and Johnson, D., “Multi-field FE modeling of resistive heating in a 6061-T6511 aluminum specimen,” 2006 American Society of Mechanical Engineers-International Mechanical Engineering Congress and Exposition, IMECE2006-15677, 10 pp., 2006.

Johnson, David H., “ANSYS workbench environment in education,” Proceedings of the 2006 International ANSYS Conference and Exposition (peer reviewed), Pittsburgh, PA, May 2-4, 2006.

Roth, J. T., Khalilollahi, A., and Johnson, D. H., “Multi-field FE modeling of resistive heating in a 6061-T6511 aluminum specimen”, Proceedings of IMECE: ASME International Mechanical Engineering Congress and Exhibition, IMECE2006-15677, Chicago, IL, November 5-10, 2006.

Englund, R., Sweeney, S., and Johnson, D., “A demonstration of heat affected zone from welding,” 2005 ASEE Annual Conference and Exposition, session 1150, Portland, OR, 9 pp., June 2005.

Johnson, D. H., and Englund, R. B., “Mechanical stress relief simulation,” Proceedings of the 2004 International ANSYS Conference & Exposition, Pittsburgh, PA, 13 pp., May 2004.

Sweeney, S. K., Johnson, D. H., and Turso, J. A., “Development of a mechanical vibrations course for engineering technologists,” Proceedings of the 2003 American Society for Engineering Education (IEEE) Annual Conference & Exposition, session 2648, Nashville, TN, 13 pp., June 2003.

Johnson, D. H., “Principles of simulating contact between parts with ANSYS, Part 2,” International ANSYS Conference and Exposition, PDF file on CD, 12 pp., 2002.

Dropik, M. J., Johnson, D. H., and Roth, D. E., “Developing an ANSYS creep model for polypropylene from experimental data,” International ANSYS Conference and Exposition, PDF file on CD, 13 pp., 2002.

Johnson, D. H., “Principles of simulating contact between parts with ANSYS,” Mallett Technology’s ANSYS Users’ Conference, 6 pp., October 2, 2001.

Torres, K., Holliday-Darr, K., Forsman, D., Baird, D., and Johnson, D., “Tech prep camp: Introducing high school students to engineering technology through model rocketry,” American Society of Engineering Educators, National Conference, session 3253, 11 pp., June 19-21, 2000.

Johnson, D. H., and Pal, D., “Simulation of an ultrasonic piezoelectric transducer,” International ANSYS Conference and Exposition, 5 pp., August 28-30, 2000.

Johnson, D. H., Englund, R. B., McAnlis, B. C., Sari, K. C., and Columbet, D., “Three-dimensional modeling of a bolted connection,” International ANSYS Conference and Exposition, 6 pp., August 28-30, 2000.

Englund, R. B., Johnson, D. H., and Sweeney, S. K., “A finite element analysis study of non-linear behavior in a bolted connection,” American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, DE-Vol.102:73-79, November 1999.

Johnson, D. H., and Heald, E. E., “Design of experiments methods for a nonlinear buckling FEA study,” International ANSYS Conference and Exhibition, vol. 1, pp. 513-520, 1998.

Johnson, D. H., and Fisher, K. J., “Design of a robotic gripper for an automated forge press,” ASME Technical Paper 97-WA/MET-8, 1997 International Mechanical Engineering Congress & Exposition, pp. 1-10, November 1997.

Johnson, D. H., “Open section buckling study using design of experiments and response surface methodology techniques,” ASME Technical Paper 97-WA/MET-6, 1997 International Mechanical Engineering Congress & Exposition, vol. 14, no. 2, pp. 42-48, 1997.

Heald, E. E., and Johnson, D. H., “Heat transfer in finned aluminum heat sinks by ANSYS, FLOTRAN and experimental methods,” International ANSYS Conference, vol. 2, no. 2, pp. 353-259, 1996.

Fisher, K. J., Farrell, R. E., and Johnson, D. H., “Rotational mold system having energy storage and recovery,” American Society of Mechanical Engineers International Mechanical Engineering, Congress 1996, 96-WA/MET-4, pp. 1-6, 1996.

Heald, E. E., Horne, E., and Johnson, D. H., “Not so simple heat transfer for finned heat sinks,” International ANSYS Conference 1994, vol. 1, pp. 3:73-3:84, 1994.

Heald, E. E., Horne, E., and Johnson, D. H., “Not so simple heat transfer for finned heat sinks,” 1995 ANSYS Conference in Japan, pp. 35-59, 1995.

Heald, E. E., Horne, E., and Johnson, D. H., “Not so simple heat transfer for finned heat sinks,” 1995 ANSYS Conference in Korea, pp. 1-25, 1995.

Rajakumar, C., and Johnson, D. H., “Investigations of free convection heat transfer in electronic packaging using the ANSYS finite element program,” International ANSYS Conference, pp. 44-55, 1987.

Rajakumar, C., and Johnson, D. H., “Finite element predictions of free convection heat transfer coefficients of simulated electronic circuit boards,” American Society of Mechanical Engineers Winter Annual Meeting, pp. 1-8, 1987.

Johnson, D. H., “Finite element design optimization of the WABCO 170 ton Haulpak truck frame,” Society of Automotive Engineers Earthmoving Industry Conference, SAE paper 860748, pp. 1-4, 1986.

Books

Johnson, D. H., Heald, E. E., and Roth, D. E., Heat Transfer Users Guide for ANSYS 5.1, ANSYS, Inc., 578 pp., 1995. [Principal author]

Johnson, D. H., Substructuring User's Guide, Swanson Analysis Systems, Inc., 338 pp., 1993.

Johnson, D. H., Substructuring with the ANSYS Program, Swanson Analysis Systems, Inc., 330 pp., 1991.

Johnson, D. H., Postprocessing, Swanson Analysis Systems, Inc., 103 pp., 1989.

Johnson, D. H., 2D Fluid Flow Element (STIF15), Swanson Analysis Systems, Inc., 53 pp., 1987.

Book reviews

Reviewed textbook, ANSYS Heat Transfer Training Manual, Release 5.5, November 1998.

Chapter 2 of Computer Visualization, eds. R.S. Gallagher, CRC Press, Inc., included in the "Acknowledgment" on page xi, January 1995.

Articles published in nonrefereed journals

Johnson, D. H., Logan, C., and Roberts, R., “Vaporization rates for rolling oil using computer simulations improves safety in coil/foil annealing,” Light Metal Age, pp. 44-47, June 2005.

Johnson, D. H., “3D Modeling of a Bolted Connection: An Exercise in  Mapped Meshing and Patience,” SoftWords Newsletter, published by Ohio Computer Aided Engineering, Inc. and Advanced Engineering Technology, vol. 22, 1st Quarter, 2pp., 2002.

Johnson, D. H., “Out of This World Analysis,” SoftWords Newsletter,  published by Ohio Computer Aided Engineering, Inc. and Advanced  Engineering Technologies, vol. 24, 3rd Quarter, 2 pp., 2002.

Johnson, D. H., “Graphics tip,” ANSYS News, Third Issue, pp. 27, 1990.

Rogers, C. R., and Johnson, D. H., “New substructure interface,” ANSYS  News, Third Issue, pp. 24, 1990.

Johnson, D. H., “Command abbreviations in ANSYS 4.4A,” ANSYS News, Third Issue, pp. 9, 1990.
               
Johnson, D. H., “Graphics setup using macros,” ANSYS News, Fourth issue, pp. 11, 1990.

Johnson, D. H., and Lesko, J., “Tektronix terminal setting after exiting ANSYS,” ANSYS News, Third Issue, pp. 12-13, 1989.

Johnson, D. H., “User's update - Estimating solution file sizes for ANSYS 4.3, ANSYS News, Third Issue, pp. 11, 1988.

Johnson, D. H., “User's update - ANSYS rev. 4.3 graphics,” ANSYS News, Third Issue, pp. 6-7, 1987.

Johnson, D. H., “Graphics update,” ANSYS News, Fifth Issue, pp. 6, 1987.